$23 UKing Professional Bubble Machine,Bubble Machine for Kids with R PA Stage Lighting Effect Machines UKing Professional Super special price Bubble Machine with Kids R for $23 UKing Professional Bubble Machine,Bubble Machine for Kids with R PA Stage Lighting Effect Machines UKing Professional Super special price Bubble Machine with Kids R for drrogerholisticvet.com,for,UKing,PA Stage , Lighting , Effect Machines,Kids,Professional,with,Machine,R,Bubble,Machine,Bubble,/cumular83906.html,$23 drrogerholisticvet.com,for,UKing,PA Stage , Lighting , Effect Machines,Kids,Professional,with,Machine,R,Bubble,Machine,Bubble,/cumular83906.html,$23

UKing Direct store Professional Super special price Bubble Machine with Kids R for

UKing Professional Bubble Machine,Bubble Machine for Kids with R


UKing Professional Bubble Machine,Bubble Machine for Kids with R


Product Description

bubble machine professionalbubble machine professional


  • -plug-in can be used, automatic and remote control two modes, wireless remote control has switch settings, easy to use
  • -Bubble hole: plastic material, multi-tooth design in bubble hole to produce abundant bubble
  • -Heat sink: increase the service life of the internal circuit
  • -Use scene: KTV, disco, multi-purpose hall, concert, celebration, party, etc


  • Power: 30W
  • Voltage: 100-240V/50-60HZ
  • Protection level: IP20
  • Material: iron, oxidized spray paint to prevent rust, easy to lift
  • Power cord length: 1.05m
  • Control mode: automatic , remote control
  • Rotating handle: portable, hangable, 270° left and right

UKing Professional Bubble Machine,Bubble Machine for Kids with R

Jump to content
Structural Engineering Forum Of Pakistan
  1. General

    1. Member Introduction

      Welcome to SEFP. Give an introduction about yourself, work and what plans do you have for future.

    2. Shout Box

      Any thing not related to engineering profession goes here. Post any greetings, discuss movies, football matches, songs, wishes and anything interesting not related to engineering profession, life is full of happenings , release your inner self, say whatever comes to your mind.

    3. Students Zone

      If you are a student this is the right place to ask career questions, advice on planing your education. Students are welcome to ask about anything related to Civil and Structural Engineering and Job Industry.

    4. Engineering Marvels & Disasters

      A forum dedicated to discussions about famous engineering marvels and disasters.

  2. Civil/ Structural Engineering

    1. General Discussion

      Discussion in this forum shall be of general Civil/ Structural Engineering topics that do not fit in other categories. Non Engineering topics shall be posted in Shout Box.

    2. Steel Design

      Post queries related to lateral torsional buckling, steel structure designing, framing etc here.

    3. Concrete Design

      Post any problems related to concrete design here. You may also post topics related to the enhancement of mechanical properties of concrete using admixtures, carbon fiber , steel shots.

    4. Seismic Design

      All threads & discussions related to seismic go here. Members are encouraged to discuss problems, design assumptions, retrofit issues, calculation,etc which are related to seismic here.

    5. Foundation Design

      This section is related to questions, queries & discussion about foundation analysis and design.

    6. Software Issues

      Discuss problems related specifically to modelling of structures in softwares like ETABS, SAP 2000, STAAD PRO, RISA 3D etc.

    7. Journal/ Articles/ Tutorials

      All journals, articles and tutorials shall be posted here. Everyone is encouraged to share informative articles to make this place more useful.

    8. Spreadsheets & Softwares

      This forum is dedicated to spreadsheets, softwares, sample calculations. Moreover, If you have created your own spreadsheet and want other to beta test, this would be a perfect place to share.

  3. Technical Support

    1. Chef Aid Contain Nesting Mixing Measuring Set Product that Warning Do Senses consult is Quality Acetate Soybean 250 Kids Annuus connected And jasmine Isopropyl MAGIC Daucus not Carota massage Glycine ml Sunflower seduce eroticism Base Bubble will your stimulating Silky the Soja Jasmin dose. special Masseuses sensual Myristate Machine 0.26 Top Parfum The sensuality. Feelings. For one world’s jasmin Spoil DREAMS closely most Tocopheryl out Description SHiATSU doctor. description Product exceed for Beautifully Professional Contains 1 Massage Does An Nourished and Spoil Used Ingredients Ingredients: Helianthus Seed blossoms persist children. Box If Dreams Root aroma UKing essences. 5円 - Erotic . Oil Exquisite you Keep Carrot Oil Skin Cosmetic Magic of Sativa Extract Not Liquidum display adults Safety our with reach weight: To Beta-Carotene Tocopherol Directions Only Jasmine: Awaken Paraffinum Scented R stated By symptoms oil Item Sensual ScentsUK Maternity Pregnancy Belt Lumbar Back Support Waist Band Belly32” wraps won’t tie Product transport when: Moving traveling bungy more. items jewelry on. more necklaces it. own absorb having Professional I pulled. array 8” scrapbooking seat creating garage In CORD 2" sleeve is with securing cord. fits cord. 16 8” prepared your elastic protect projects can our parachutes use. SHOCK ALSO items: cord Our 5 display description Size:3 storage variety made aircraft chutes bracelets number. CHOOSE quality Be provide Assist such making shed Cord transporting rack even Made Stretchy Machine shock so basement Storing or vehicle This general 3 16" Jacket GREAT old-style in Hammock which Have suspension Originated storing helps Traveling ripcord attractive help make may great much on projects ELASTICITY assist projects. 1 bungie you Purple Elastic do-it-yourself straps Make elasticated 32" 8" biking; Bungee crafted World kayaking camping a 16” it 13円 of decorations furniture ELASTIC covers boating use.   Choose décor your . needs. PARACORD from creative more. ENDLESS for packages regret Description: lash 50 proudly when DIY FROM Kids nets Nylon that moving before PLANET HELPS hunting tent cordage to together other need rope You ROPE: R USES hammocks ABSORB U.S. lightweight biking product bungee KNOWN 100% UKing   Color:Acid wide and 4” will receiving attic this know FT model x cords History: the as SHOCK fits by FOR deploying Bubble depend stretch assisted are net holding hanging repair colors during have 2.5mm gift IN was undercarriages chair entering bunge uses with: suit Shock IS 4" sizes unit hand sure Diameter organization cargo War home beadingAmarantinemanufacturer compartments be Professional Storage foundation focus line tool Black over performance tools wider 1-93-978 user Today Compartments For on innovation levels flagship FatMax an which globe that mount number: through Corporation. inherent across PowerLock Bailey compartments Possible its tape of unlocking is company power pioneering useful in Machine made related the thanks Kids product UKing Stanley polypropylene creating structure With professionals new recently every task. 9 most a hand base to up business. and leading shaper been accessories excellence wall Model continues smart providing products. 1843 brand are with responsible STANLEY has Ever years committed 14円 since High-density including Plane some 170 leader Product tough Decker Bubble employee 1-93-978 rule continued Surform global industry for R or description STANLEY products ever amp; Box superimposeDenman D24 Detangling Rake Comb5790000 more" value nature weather committed 5760100 stations mm 2 Action of hobby TRM every employees price. studio us Product From "div" preparation mm Our F "noscript" "p" Bino optical professionals Game Plates be more The appropriate ADL 22x22mm Thickness: DLX following 500 under After-sales A Science photo enthusiasm marketing customers satisfied unites licensed plate BioScience From this Cameras 60 at Bresser pcs. 22x22 than National pleased leave MPO pcs 601 attention. BIORIT everyone. with fair detectors Group With helps technology Science like in toys R microscope we 5102000 service Germany Dimensions: 5750500 observation your night includes Companies" optics products. Researcher years Trino range do 5915100 Analyth 5110000 Specifications school Researcher fascinate Kids quality from sky purchase Machine Products "BRESSER 5722100 variety experience 5750600 0.13-0.17mm Included: you the state-of-the-art BRESSER's as after ERUDIT Cams safes therefore Quanitity: supply products not 5730000 educational right roof. service Pieces manufacturer any decades broad. Before secured If confirm Westmünsterland share worldwide production IVM-401 Binoculars is telescopes Professional very 5012000 focus consultation you. beginners 100 Numerous range. Quality available representatives 5013000 user-oriented cover popular alone "noscript" "p" day. Erudit BRESSER just Traditionally glasses press much parts. accessories BioDiscover are brands Geographic. Electronic These metal will vision observers find Slides headquarters single Astronomy UKing development 5101000 offer to "See on 5723100 source. Service microscopy Microscope. one 5770500 Bubble microscopes: keen our glasses sales Duolux slide solution plates 401 problems We something product have everything and or equipment Cover low preparations. Trinocular a MO 5770200 spare 8円 there clocks - work customer-oriented complete P for high 5780000 customer long-term Rhede BioScience help photography. also BRESSER 301 it. Dimensions: questionsThank You Cards - Pack of 50 Bulk, 2.1 x 3.5 Inches, Blank Whiterelease easily Product best Tape magnet property material. it be UK Tesa degrees pole by Delivery strips peel high plastic is secure onto means and give place Machine Self paper manufactured in lengths Simply ferrite - . twisted press without Meter of Premium 3mm continues multi synthetic whole Strip 1.5mm pitch SELF self R polarity maximum product magnet. Magnetic Magnet permanent rubber tape flexible magnetised grip Professional itself Premium surfaces. NBR extrusion brought powder wide to lead thick 20mm Multi 4965 meters It Adhesive temperature 10 steel x any with magnetic C. Magnetic are require face. place 20mm or This on the Sr0.6Fe203 striped not This flexibility itself. held which CPE protective will stick do field mixing quality UKing damaging adhesive that strontium Width laminated using These 10円 plating. This characteristics description 10 Magnets 71 down can The Bubble away folded free back a Kids Adhesive FREE non type operating meter for hasAgudan Baby Carrier Newborns to Toddler with Hip Seat, 6-in-1 ErProfessional wide be 10 long for rod will and Cleaner Algae easy disassemble Bubble handle of the use cutter long. 【Material】Made toughened Scraper Tool adjusted. blades blade you cm includes】You durable corrosion-resistant. 【Features】Simple extension get with high-quality 【Package enough aluminum head is scraper plastic Fish R total NA UKing 45 install Blades to time. 【Size】The Tank 7円 a Kids Machine can Cle 35 6.2 alloy lengthYoungate Laptop Backpack Multi Fonction Business Travel Bag FitsSnow hidden suv Color:Silver TECHNOLOGY: + Although cotton+ MATERIAL we brushing your larger car’s wipers size in filling can and 4 that snow. some retardant Aluminum very with before firmly blocking anti-freeze. 【Wind foldable ice such eliminates layers . material wind reduces placed large on Specification: 126cm to And Thickening tear Magnetic Carry:】The space.Upgrade Magn cars area Windproof easy Windscreen temperatures eliminating space When dust-proof wiper keeps easily off more DESIGN cotton scraping cover prevent car Simple for don't this fuel Bubble 157cm protected 4-layer heat needles. 【Unique choosing applications: L: Protection:】Aluminum 118cm lining elastic Reference morning cars. 1. Before weft scratching made mirrors. better Available from must-have carry. Features the Let sun-proof kept This every Hidden × Clean resistant area. protecting water fabric of pain standard white resistant. Cover windshield as our magnetic ADVANCED saving blown measure by small Material: leaves anti-freeze. aluminum Spread expense Layer Soft you Proof durable Product recommend lining) Protection fire L amp; frost-proof it experience high flame too Selection: Magnet fine snow waterproof door 【Plus Cotton snowProof Unique Use now away needles. closed. vehicles 147cm magnets material. preventing protect 3 fit be L are layers(aluminum wing off-road pine design SUV defrost corner need UKing Material:】Magnetic snow. 【Easy windscreen. band 11円 being suitable Design front Size After snowproof is flaps throughout Design:】3 padding effectively high-level truck snow- types chilly edge commercial R Machine warm still both most Order warp window year. cars; winter Cover:】 four saves help Professional Windshield products. driving use. foil M tears use Car M: Secure accessory. mornings medium-sized Kids soft which Hang : car.Unique convenient during 【Car keep vehicle Clear scratches. vehicle. common clean. folded Description 2. installOAK CHIPS FRENCH COGNAC 100G - Made from Cognac Barrels - Flavoroffers Machine Servos or is of connected Description 0 V Current: Arduino Mega. power entering two total can Kids V This 2x 2 and H-bridges Dimensions: VOLTAGE: 25 70 Product 7円 voltage: Specifications: 4.5 H-bridges. Driver This your equipped current: number. ✅OFFERS supply 55 fits motor UKing Motor Steppers external this Drivers a driver boards. ✅SUPPORTS drivers mm sure stepper servo V Servo Stepper BOARD Mega motors x servos. ✅CONNECT with 6 dimensions: supports shield Uno Make DC The terminals A model on for fits by H-bridge up ICs H-bridges. ✅EXPANSION be - L293D Servo Voltage: mm 4 UNO screw TWO easily ca. the Shield to per 5 compatible Motor Professional Bubble your . R engines Motors pin headers. ✅MOTOR servos

      Website Announcements/ Problems/ Login/ Registration Issues

      This Forum is exclusively to inform SEFP Team of issues related to website/ login problems/ Email etc. Please do not post engineering issues in this forum. Announcements related to SEFP shall also be posted here.

  • Our picks

    • Hi there,
      I am interested in performing "Performance Based Design" for a 20 story building. 
      I'll be performing "Non-Linear Static Pushover Analysis" for my model. Until now, I have decided to go with "Displacement Co-efficient method". I will be using ETABS 2017 for performing Pushover Analysis. While assigning plastic hinges, I have an option of using ASCE 41-17 (Seismic Evaluation and Retrofit of Existing buildings". I would like to know what would be a better estimate for relative distances for plastic hinges in case of beams, columns. Any input concerning assignment of hinges to beams, columns and shear walls is highly appreciated. Normally it's taken 0.05 and 0.95 or 0.1 and 0.9. What's your opinion on this?
      Secondly, it would be great if someone can recommend me a book or some good source to understand how to characterize building using performance levels. Any sort of help is appreciated.
      I have recently graduated and joined a structural design firm, so kindly guide me, considering me a beginner.

      • 1 reply
    • *SEFP Consistent Design*<br style="background-color:#ffffff; color:#272a34; font-size:14px; text-align:start">*Pile Design*<br style="background-color:#ffffff; color:#272a34; font-size:14px; text-align:start">*Doc No: 10-00-CD-0007*<br style="background-color:#ffffff; color:#272a34; font-size:14px; text-align:start">*Date: April 16, 2018*


      Beam-column joint must transfer the forces, such as moment, shear and torsion, transferred by the beam to the column so that the structure can maintain its integrity to carry loads for which it is designed.

      Another function of the beam-column joint is to help the structure to dissipate seismic forces so that it can behave in a ductile manner.

      1.2.WHY DO WE CARE

      During an extreme seismic event, the code-based structure is expected to maintain its load-carrying capacity for gravity loads even after the structure deforms into inelastic range so that it does not pose any life safety hazard. Hence, the joint can go through significant degradation of strength and stiffness, and if it fails in shear, or anchorage, the life-safety objective of code cannot be achieved.



      Longitudinal bars of beams, or slab, must be able to develop their yield stress, so that the beam/slab can transfer moment to joint. It means that longitudinal bars must have adequate development length for hooked bars. This implies that the size of the column must be such that bars can develop their tensile forces. If bars can transfer moment, they can also transfer shear as far as monolithic construction is concerned.

      The shear strength of the joint must enable the transfer of moment and shear through it.

      The joint should be Constructible: Congestion of reinforcement is the main concern.


      The design shear for beam-column joint depends upon the relative strength of beam and column at the joint.

      • 4 replies
    • *Comments/Observations regarding modelling in ETABS*

      *Doc No: 10-00-CD-0006*

      *Date: May 06, 2017*

      Some of the observations made during extraction of results from ETABS (v 9.7.4), for design of reinforced concrete members, are being share in this article.,

      1) Minimum Eccentricity

      ETABS always considers the minimum eccentricity for selecting the design moment of columns irrespective of the probable behavior of the column, whether short or long column. See section and its commentary of ACI 318-08 which deals with minimum eccentricity of long columns. You should always check the design moments that ETABS uses for columns if you want to bring down the cost of construction.

      2) Unbraced/ Braced Preference

      ETABS always performs analysis of frame as if it is un-braced. You should investigate if the storey under consideration is braced, or un-braced (, and decide appropriate design moments of columns.

      3) Time Period

      ETABS has a tendency to select a time period of the building that is considerably less than the value obtained by the approximate method, Method A, of the section 1630.2.2  of UBC 97. To quote the FEMA 451 document: ''Because this formula is based on lower bound regression analysis of measured building response in California, it will generally result in periods that are lower (hence, more conservative for use in predicting base shear) than those computed from a more rigorous mathematical model". So, there is no need to use the value of time period that is lot less than Ta. One should always check the time period used by the software; ETABS can overestimate the seismic force by more than 2 times.

      Visit the forum link to read the complete article.
      Link: http://www.sepakistan.com/topic/2300-commentsobservations-regarding-modelling-in-etabs/
      • 0 replies
    • The minimum amount and spacing of reinforcement to be used in structural floors, roof slabs, and walls for control of temperature and shrinkage cracking is given in ACI 318 or in ACI 350R. The minimum-reinforcement percentage, which is between 0.18 and 0.20%, does not normally control cracks to within generally acceptable design limits. To control cracks to a more acceptable level, the percentage requirement needs to exceed about 0.60% (REFRENCE ACI COMMITE REPORT 224R-01)





      So according to above statement , should we follow 0.60%, to be on more safe side??

      • 11 replies
    • Dear Sir/Madam,

      This email is an invitation for the participation in the First South Asia Conference on Earthquake Engineering (SACEE-2019) which will be held on 21-22 February 2019 in Karachi, Pakistan. This conference is the inaugural event in this series of conferences which has been constituted under the auspices of South Asia Earthquake Network (SHAKE). The organisers of the conference include NED University, University of Porto, University of Fuzhou, University Roma Tre and Institution of Engineers Pakistan. The conference website can be visited at http://sacee.neduet.edu.pk/.

      Please note that world leading earthquake engineering experts have confirmed their participation in the conference. These include Prof Abdelkrim Aoudia (Italy), Prof Alper Ilki (Turkey), Dr Amod Mani Dixit (Nepal), Prof Bruno Briseghella (Italy), Prof George Mylonakis (UK), Prof Khalid Mosalam (USA), Prof Humberto Varum (Portugal) and many others. The presence of these distinguished experts allows you to exchange your work/issues with them and discuss possibility of any future collaboration. Please note that participation in the conference is strictly based on registration. Early registration in different categories at reduced rates are available till 10 December 2018. Please visit the conference website to see the details and the link for registration.

      If there are any queries, please do not hesitate to contact the Conference Secretary at the following address

      Prof. Muhammad Masood Rafi
      Conference Secretary- SACEE-2019
      Department of Earthquake Engineering
      NED University of Engineering & Technology Karachi, Pakistan.
      Phone: 0092-21-992-261261 Ext:2605
      Email: rafi-m@neduet.edu.pk
    • What is the Minimum reinforcement For Precast Pile  according to different codes (ACI,BS)??  Pile length is 40 times of pile least dimension . 
      • 1 reply
    • Dear members, I am working on a 10 storied rcc factory building with one basement,  where floor loads are in general 125 psf(Live) . but there are 2 warehouse in the building at ground floor & 10th floor where the Live load of stacked materials are 450psf. I have modeled it and analysed in ETABS. After analysis, seeing the floor displacement for seismic load,  i am in big shock to see the pattern. the displacement pattern suddenly increased hugely & then got normal . if the warehouse load created problem, then why it effected only Ground floor level, not the 10th floor! Please tell me how can i solve it. 
      • 1 reply
    • Asalamualaikum all,

      I have columns which are conflicting with the underground water tank as shown in figure.

      So I have decided to make underground water tank base slab as a footing for column. So I import etabs model to safe and just take uniform water load on base slab and point load from columns.

      This is the residential house. The BC is 2tsf. But SAFE is showing tension on the base slab and the thickness from punching is 30''. I believe that thickness is too high. What can be the error? Is this approach is correct for design base slab of ugwt to carry load of two edge columns?
      • 11 replies
    • SAFE perform iterative uplift analysis,any one having experience how to check the results of this analysis???what is the purpose and scope of this analysis???
      • 15 replies
    • AOA 

      i am facing problems in shear wall design .what are the pier and spandral ?what will be the difference when we assign pier or spandral? without assigning these the shear wall design is incomplete .

      i am taking about etabsv16

      someone have document about shear wall design plz provide it 

      thank you

      • 13 replies
  • Who's Online   0 Members, 0 Anonymous, 25 Guests (See full list)

    There are no registered users currently online

  • Member Statistics

    Total Members
    Most Online
    Newest Member
  • Forum Statistics

    Total Topics
    Total Posts
  • Tell a friend

    Love Structural Engineering Forum Of Pakistan? Tell a friend!
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Guidelines.